go-e Charger Gemini flex 2.0 11kW

The go-e Charger Gemini flex 2.0 with integrated SIM card and a maximum charging capacity of 11 kW is a wallbox for charging electric cars that can also be converted into a mobile charging station* in just a few seconds. The charger is suitable for indoor and outdoor installation and can be connected directly to an existing red CEE 32 A three-phase socket. It is ready for the first charging process immediately after connection (Plug&Play). Thanks to the integrated SIM card, you can access your portable wallbox from anywhere.

The mobile charging station is completely safe to use. The RCD protection module switches the charger off completely in the event of DC residual currents. The charging station can be used with or without an app. The free go-e Charger app can be used to change the convenience and basic settings, allowing the device to be adapted to your personal charging behavior. For example, you can plan the charging process to make it more sustainable and reduce the load on the power grid.

Scope of delivery:

• Charging station 11 kW* with 16 A CEE red plug
• Wall bracket incl. screws and dowels
• Optionally mountable anti-theft device (U-piece)
• One reset card
• One RFID chip (already programmed)
• Quick guide

Product specifications:

• Dimensions: approx. 15.5 x 26 x 11 cm
• Weight: approx. 1.63 kg
• Connection cable: 30 cm + plug, 5 x 2.5 mm² (type H07BQ-F)
• Connection: Single or three-phase
• Rated voltage: 230/240 V (single-phase) / 400/415 V (three-phase)
• Nominal frequency: 50 Hz
• Mains forms: TT/TN/IT
• Standby power: 3.1 W (LEDs dark) to 5.2 W (LEDs bright)
• RFID: 13.56 MHz
• WLAN: 802.11b/g/n 2.4GHz / frequency band 2412-2472Mhz
• Mobile connection: 4G | LTE / 2G | EDGE / supported frequency bands: GSM900, GSM1800, LTE FDD: B1 B3 B5 B7 B8 B20 / frequency range: 800MHz – 2600MHz

Supplementary mobile phone specifications:

• Mobile phone contract: at least 5 years free mobile phone connection. Extension possible for 12 euros (incl. VAT) per year
• SIM card format: Factory-integrated eSIM from go-e (not exchangeable). Factory-installed customer’s own nano-SIM for larger B2B projects
• Activation/deactivation: At any time via go-e app or API
• Connection types: Standard: 4G LTE Cat-1, fallback in case of limited reception: 2G/EDGE
• Country availability go-e tariff: Free mobile connection in all EU countries, the UK, Switzerland, Liechtenstein and Norway. Free roaming between these countries.
• Mobile networks: An overview of the mobile networks used in the above-mentioned countries is available here.

Permissible ambient conditions:

• Installation location: Indoors and outdoors, without direct sunlight
• Operating temperature: -25 °C to + 40 °C
• Storage temperature: -40 °C to + 85 °C
• Average temperature in 24 hours: Maximum 35 °C
• Altitude: Maximum 2,000 m above sea level
• Relative humidity: Maximum 95 % (non-condensing)
• Impact resistance: IK08

Charging Capacity:

• Maximum charging power 11 kW (32 A 3-phase)
• Ampere and status display: Can be read via LED ring and app
• Setting the charging power: Via push button and app
• Charging power adjustable between 1.4 kW and 11 kW depending on the number of phases of the car’s onboard charger (via the charging current in 1 ampere steps between 6 A and 16 A)
  • Single-phase charging car: 1.4 kW to 3.7 kW (country-specific limitations must be observed)
  • Two-phase charging car: 2.8 kW to 7.4 kW (two-phase connection of the charger is not possible)
  • Three-phase charging car: 4.2 kW to 11 kW (go-e Charger switches through the power that is available at the connection)

Connection to infrastructure:

• CEE red 16 A (3-phase)
• With original go-e adapters (available as accessories):
  • Gemini flex 2.0 11 kW to CEE red 32 A (three-phase – limited to 16 A by charging box)
  • Gemini flex 2.0 11 kW to CEE blue 16 A (single-phase)
  • Gemini flex 2.0 11 kW to safety plug 16 A (household socket – single-phase)

Connection to vehicle:

• Type 2 socket (according to EN 62196-2) with mechanical interlock (own type 2 cable required, available as accessory)
• Vehicles with type 1 can be charged with a type 2 to type 1 adapter cable (available as an accessory)

Safety functions:

• RCD protection module with DC current detection: 20 mA AC, 6 mA DC
• Protection class: I
• Degree of pollution: II
• Theft protection: Locking of the charging cable
• Access control: Can be activated if required. Activation possible via the RFID chip included or via APP
• Input voltage: Phase and voltage check
• Switching functions: Testing the switching functions
• Earthing test: For TT, TN networks (switchable earthing test for IT network – Norway mode)
• Current sensor: 3-phase
• Temperature sensors: Regulation of the charging current in the event of overtemperature
• IP65: Protection against dirt and water, suitable for permanent outdoor operation
• go-e grid operator API: For authorized access of the power grid operator to the go-e Charger for grid-serving power control
• Modbus TCP: for grid-serving power control by the electricity grid operator, among other things

App and connectivity:

• Local (WLAN hotspot) or worldwide** (WLAN or mobile network) control and monitoring
• Setting/checking the charge (voltage, current, power, energy)
• Adjustment of the current level in 1 ampere steps
• Start/stop function
• Manage RFID chips/cards (up to 10 users per charger) / access management (RFID/app)
• Charging timer
• Electricity meter (total kWh and total quantity per RFID chip)
• kWh limit mode / Eco mode** / Daily trip mode**
• Push notifications**
• Cable unlocking functions
• Flexible electricity tariffs with intelligent charging management**/***
• Static load management**
• Photovoltaic connection via go-e Controller (separate product), open API interface (programming required) or alternative energy management system**
• OCPP 1.6**
• LED adjustment
• Management of charging levels via push button on the charging station
• Can be updated for later functions (smart home, etc.)**
• Automatic unlocking of the charging cable in the event of a power failure
• 1-/3-phase switching via app or automatically with go-e Controller – even during the charging process
• Synchronization of charging processes with the cloud and display of past charging processes**
• Documented public API interfaces: HTTP, MQTT (only possible via WLAN), Modbus TCP (only possible via WLAN)

Important note: the mobile connection with the go-e tariff works in all EU countries as well as in the UK, Switzerland, Norway and Liechtenstein, including free roaming.

*If you want to use a special car power tariff to charge your electric car in Germany, ask your electricity provider whether they recognize a mobile charging station. If not, the stationary go-e Charger Gemini would be the right choice.

**Internet connection of the charger required.

***Contract required with an electricity provider whose flexible electricity tariff is integrated in the go-e app. Several 100 tariffs are available. The number of tariffs is constantly being expanded.

****Separate electricity supply contract with partner aWATTar required, currently only available in Austria and Germany.

Manufacturer’s warranty: 36 months
Item number: GOE0021

go-e GmbH
Satellitenstraße 1
9560 Feldkirchen
office@go-e.com