go-e Charger PRO CABLE

The go-e Charger PRO with integrated MID-compliant meter is suitable for the needs of companies, fleets, company car drivers who charge at home or apartment buildings. In addition to all the smart features known from go-e, the stationary wallbox is also ISO 15118 V2X ready and Plug & Charge ready, offering even more charging convenience and efficiency gains with these innovations.

The charging current can be clearly assigned to a person via user identification and authorization via RFID and, thanks to MID-compliant energy meters, can be billed with kWh accuracy and legal certainty.

With the go-e Charger and the go-e Controller, you can charge simply and intelligently with excess PV and benefit from dynamic load management, also in combination with flexible electricity tariffs. Whether you are an experienced user or new to photovoltaics, the duo is the perfect choice. Connection to other energy management systems is also possible via an API, Modbus TCP or OCPP.

Scope of delivery:

• Charging station with 6 meter permanently connected charging cable and type 2 plug (according to IEC 62196)
• Charging power limited to 11 kW on delivery, can be increased to 22 kW by the installer
• Wall bracket incl. screws and plugs
• One reset card
• One RFID chip (already programmed)
• Quick guide

Product specifications:

• Dimensions (W x H x D): approx. 18.6 x 29.7 x 9.9 cm
• Weight: approx. 2 kg
• Connection cable: 6 m, 5 x 6 mm² + 1 x 0.5 mm²
• Connection: Single or three-phase
• Nominal voltage: 230/240 V (single-phase) / 400/415 V (three-phase)
• Nominal frequency: 50 Hz
• Mains types: TT/TN/IT
• RFID: 13.56 MHz
• WLAN: 802.11b/g/n 2.4GHz / frequency band 2412-2472Mhz
• Mobile connection: LTE / GPRS | EGRPS / supported frequency bands: GSM900, GSM-DCS 1800, LTE FDD: B1 B3 B5 B7 B8 B20 / frequency
• range: 900MHz – 1800MHz

Supplementary mobile phone specifications:

• Mobile phone contract: at least 5 years free mobile phone connection. Extension possible for 12 euros (incl. VAT) per year
• SIM card format: Factory-integrated eSIM from go-e (not exchangeable). Factory-installed customer’s own nano-SIM for larger B2B projects
• Activation/deactivation: At any time via go-e app or API
• Connection types: Standard: 4G LTE Cat-1, fallback in case of limited reception: 2G/EDGE
• Country availability go-e tarif: Free mobile connection in all EU countries, the UK, Switzerland, Liechtenstein and Norway.
• Mobile networks: An overview of the mobile networks used in the above-mentioned countries is available here.

Permitted ambient conditions:

• Installation location: Indoors and outdoors, without direct sunlight
• Operating temperature: -25 °C to + 40 °C
• Storage temperature: -40 °C to + 85 °C
• Average temperature in 24 hours: Maximum 35 °C
• Altitude: Maximum 2,000 m above sea level
• Relative humidity: Maximum 95 % (non-condensing)
• Impact resistance: IK08

Charging power:

• Maximum charging power up to 11 kW | Charging power limited to 11 kW on delivery, can be increased to 22 kW by the installer
• Ampere and status display: Can be read via LED ring and app
• Setting the charging power: via push button and app
• Charging power can be adjusted between 1.4 kW and 11 kW via app or go-e backend depending on the number of phases of the car’s onboard charger (via the charging current in 1 ampere steps between 6 A and 16 A)
  • Single-phase charging car: 1.4 kW to 3.7 kW (country-specific limitations must be observed)
  • Two-phase charging car: 2.8 kW to 7.4 kW (two-phase connection of the charger is not possible)
  • Three-phase charging car: 4.2 kW to 11 kW (go-e Charger switches through the power that is available at the connection)

Connection to vehicle:

• Type 2 socket (according to EN 61851-1:2019)

Safety functions:

• RCD protection module with direct current detection: 20 mA AC, 6 mA DC
• Protection class: I
• Pollution degree: II
• Access control: Can be activated if required. Authentication via RFID or APP possible. A trained RFID chip is already included.
• Input voltage: Phase and voltage testing
• Switching functions: Testing the switching functions
• Earthing test: For TT, TN networks (switchable earthing test for IT network – Norway mode)
• Current sensor: 3-phase
• Temperature sensors: regulate the charging current in the event of overtemperature
• IP55: Protection against dirt and water, suitable for permanent outdoor operation
• API: Open and documented local + cloud HTTP API, Modbus TCP, MQTT

More convenience with the go-e app:

• free download
• Monitor and change the charging status at any time
• Adapt charging processes to personal requirements
• Protection against unwanted use
• Many other smart convenience and safety settings
• Available in several languages

Important note: the mobile connection with the go-e tariff works in all EU countries as well as in the UK, Switzerland, Norway and Liechtenstein, including free roaming.

*Contract required with an electricity provider whose flexible electricity tariff is integrated in the go-e app. Several 100 tariffs are available. The number of tariffs is constantly being expanded.
**Internet connection of the charger required.

Manufacturer’s warranty: 36 months
Item number: GOE0023