Deutsch
CHARGING
ENERGY
SMARTHOME
Homematic IP
ACCESSORIES-18%
SMA STP 10.0 SMART ENERGY – STP10.0-3SE-40
Original price was: 3.199,00 €.2.639,00 €Current price is: 2.639,00 €.
incl. 20% VAT
Free shipping within the EU
Shipping time: 1-3 business days
The Sunny Tripower Smart Energy hybrid inverter is the 2-in-1 solution for solar power supply in the home. In it, SMA combines intelligent technologies and integrated services into a space-saving compact solution – more than 30 years of storage experience make it possible. Users generate, use and store solar power easily and conveniently with the Sunny Tripower Smart Energy. The system can be expanded at any time and also integrates electric mobility or heat pumps. The integrated backup power function secures the household’s power supply even in the event of a grid failure. Solar systems in the home thus become holistic and intelligent energy systems with up to 100 percent solar self-sufficiency.
Store energy
- 3-phase and DC-coupled
- Integrated backup power function
- High charging speed
- Compatible with high-voltage batteries from leading manufacturers
Simply connect
- Intuitive commissioning
- Quickly installed thanks to external connections
- Minimal space requirement due to compact design
Use intelligently
- Intelligent Energy Management with the Sunny Home Manager
- Maximum energy yields thanks to SMA ShadeFix
Comfortable all around
- 360° Professional Support for installers
- Automatic inverter monitoring SMA Smart Connected
- 5-year warranty (free extension to 10 years with online registration in the SMA Portal)
Manufacturer number: STP10.0-3SE-40
Item number: SMA0004
frequently asked questions
How is the STP SE commissioned?
The commissioning can be done via LAN as well as WLAN. The
The most convenient way to commission the STP SE is via the SMA 360° App on your smartphone.
Does the STP SE always have to have an online connection to the SMA Portal after commissioning and configuration?
connection to the SMA Portal after commissioning and configuration?
Basically, the device also works without the Internet, but then no monitoring is possible.
monitoring is possible. Furthermore, in cooperation with the Sunny Home
Manager 2.0, an Internet connection is also required.
Which device monitors the STP SE and sends an error message to the installer in the event of a fault?
error message to the installer?
The STP SE has the WebConnect interface and is also equipped with
“SmartConnected”. This means that the device is monitored and can
in the event of a failure/error via Sunny Portal. A functioning
Internet connection is a prerequisite.
Which meter is used to measure the energy flows at the grid-connection point?
With the SMA Energy Meter 2.0 or the Home Manager 2.0 with integrated energy meter.
meter. Nominal current 5 A, limiting current 63 A per phase. With > 63 A one can connect
can be connected.
Is the TOR generator certification for Austria available?
Tor Erzeuger type A is available.
Is FRT (fault ride through, mandatory in AT) supported?
Yes, the delay time is even adjustable.
Will there be a possibility to supply/isolate the whole house with an
Enwitec switch box (advantage: installation of the Enwitec box in the house distributor without having to
House connection through the WR to loop)?
The Sunny Tripower Smart Energy has an integrated backup power supply that can be used in the event of an
the case of a failure of the public power grid, the loads connected to the backup power
the loads connected to the backup power output from the grid and continues to supply them with 3-phase power. This happens
automatically within 30 ms (adjustable from 30 ms to 10 s), manual switching is not necessary.
switchover is not necessary – Caution in Upper Austria!
Does the mains power supply in the house fail in case of a defective STP SE?
No. In case of device failure, the power supply in the house is not affected.
How is the STP SE cooled?
It is cooled passively (fanless).
Is interconnection/cascading with several STP SE hybrid inverters possible?
possible?
No, this is not possible.
What power can be called up in standby mode and what is the switching time?
switching time?
3.33 kVA per phase, skew-load capable. Switchover time approx. 30 ms, this time is configurable
configurable if longer changeover times are required.
What does the charging and discharging power depend on?
On the battery used, but maximum 10 kW.
Which batteries work with the STP SE?
BYD Premium HVS and HVM. Later other manufacturers, LG Flex and BMZ (in 2.
Half of 2022).
Which BYD batteries can be connected?
Premium HVS 5.1 – 12.8 and HVM 8.2 – 22.1.
What is the maximum battery capacity possible with BYD HVS/HVM batteries?
(parallel connection of battery towers)? Is there a table?
Parallel connection is not possible. The maximum battery capacity usage is limited with 22 KWh
with the BYD HVM 22.1 battery. See also document “Approved BYD
Batteries and Battery Communication Connection Information.pdf” in our
download area.
Is the Sunny Home Manager 2.0 mandatory for the operation of the STP SE?
No, the SMA Energy Meter 2.0 is also sufficient, but then only for limited
functionality: charging/discharging, no e-mobility surplus controllable, no forecast-based
forecast-based charging possible. The Home Manager 2.0 enables
Sector coupling, such as intelligent control of a heat pump.
Which heat pumps can be controlled with the Home Manager?
An overview can be found in the document “SMA_SMART_HOME_Compatibility_list.pdf” in our
download area.
Is integration into existing systems with SMA or third-party heat pumps possible?
yes, this is possible. For both variants, an SMA Home Manager is required.
However, third-party inverters cannot be integrated into the inverter monitoring or monitored.
be monitored. The measurement for the energy control is carried out by the Energy Meter at the point of
grid connection point.
Can the STP SE use the AC energy coming from a connected normal SMA
Tripower WR to charge the battery?
Yes, additional PV inverters can be connected in parallel, which can also charge the battery in the event of a PV surplus.
can also charge the battery. Parallel installed inverters can
only be used in grid operation. In standby mode, the inverters installed in parallel
inverters are switched off, since the installation must not be carried out on the
may be carried out.
Can the STP SE use the PV energy coming from a connected third-party inverter via the
AC rail to charge the battery?
Yes, it is a hybrid WR.
Do existing, ordinary SMA Tripower WRs continue to run in backup power mode?
continue to run?
No. The islanding frequency formed by the STP SE is higher than the grid frequency,
therefore these WR do not start or must be disconnected from the AC grid according to standard and
be disconnected from the AC grid.
Is it possible to charge the battery AND supply the loads in the house at the same time?
Yes, this is possible. For example: 15 KWp (PV) can be divided into 10 KW (battery), 4 KW (load)
and 1 KW (grid). In this case the technical limits of the STP SE may be
(e.g. max. charging power of the battery = 10.6 kW).
Is there a possibility to set the energy flow management of the STP SE regarding the
priority (e.g. charge the battery first, supply the consumers in the house with the remaining excess
the consumers in the house, if there is still surplus energy available
then direct it to an SMA E-charging station)? Does this happen in STP SE or
in the Sunny Home Manager?
These settings are made via the Sunny Home Manager. Via the prioritization
you can specify to the consumer when he may/will use energies. Therefore
recommendation is to always equip a system with STP-SE with the SHM and to
not to use the solution with E-Meter. Then these settings are not possible.
possible.
Is the STP SE capable of black start and is this done automatically or by manual activation?
activation?
In standby mode, the system restarts automatically the next morning after a shutdown with an empty battery.
the next morning and charges the battery to a fixed minimum SoC (state of charge).
minimum SoC (state of charge). After that, the backup power consumers are
supplied again.
Will the device be included in the Sunny Design design software?
Yes, in February 2022.
Is surplus control of wallboxes possible?
Yes, with the latest release of SMA Home Manager 2.0.
How long is the product warranty?
5 years standard, for another 5 years the product has to be registered with SMA.
Feature “SmartConnected”.
Downloads
Data Sheet
Installation guide
Approved BYD batteries
Smart Home Compatibility List
Overview SMA Smart Energy Systems
Shipping costs
|
Folgende Versandkosten werden für dieses Produkt verrechnet: |
|
|
Österreich |
EUR 0,00 |
|
Deutschland |
EUR 0,00 |
|
Europäische Union |
EUR 0,00 |
|
Schweiz, Liechtenstein und Norwegen |
EUR 29,00 |
|
Sonstige Länder |
Auf Anfrage |
Weitere Informationen zu Versand & Zahlung findest du hier
You may also like…
Shipping time: 1-3 business days
699,00 €incl. 20% VAT
Related products
Shipping time: 10-14 business days
ab 2.394,00 €incl. VAT
Shipping time: 1-3 business days
1.919,00 €incl. 20% VAT
Shipping time: 1-3 business days
439,00 €incl. 20% VAT
Shipping time: 7-10 business days
4.359,00 €incl. 20% VAT
Shipping time: 7-10 business days
ab 8.587,01 €incl. VAT
-12%
Shipping time: 1-3 business days
Original price was: 1.909,00 €.1.678,00 €Current price is: 1.678,00 €.incl. 20% VAT
Shipping time: 7-10 business days
8.789,00 €incl. 20% VAT
Shipping time: 2-5 business days
ab 438,00 €incl. VAT
Reviews
There are no reviews yet